VANGUARD Combat Shirt®
SH-VGCS-PDF-PWW-B03
Direct Action - VANGUARD Combat Shirt®
A combat uniform is one of the most important layers you wear during any operation. It protects against environmental wear and tear, but should also allow proper freedom of movement. Our VANGUARD combat outshirt is made from top quality materials. The torso is made from Polartec® PowerDry FR fabric, which is not only comfortable to wear, but also stretchy, and wicks moisture away from the body. The sleeves are made from NYCO fabric, which is durable but breathable. Reinforcements on the elbows, which act as pockets for protective pads, are made from Cordura® 500D fabric. There are also additional zippered pockets on the shoulders with soft loop panels for personal adjustment.
Features:
- Two zip pockets on biceps
- Adjustable cuffs with Velcro
- YKK® zippers
- Loop panels for personalization
- Made from Polartec® PowerDry FR and NYCO fabric
- Cordura® 500D reinforcements on elbows
SIZE INSTRUCTIONS
We want to make sure that the clothes you buy really fit you – so they can fulfill their purpose properly. Please take a moment of your valuable time to check the measurement guide and the corresponding size chart to avoid mistakes.
To take the correct measurements, find clothes that fit you well and measure them.
Chest
Button up the garment and lay it on a flat surface. Measure from the left edge to the right edge, just below the sleeves.
Waist
Button up the garment and lay it on a flat surface. Measure from the left edge to the right edge at the waist.
Sleeve length
While wearing a shirt you like, measure with one arm at your side, from the shoulder seam and along the arm until you reach the desired length. We recommend that the sleeve should reach the base of your thumb (at the wrist).
For jackets with raglan sleeves, such as Stratus® or Cumulus®, sleeve measurements should be taken from the bottom of the collar down to the sleeve.
Inseam
Button up the pants. Lay the pants flat on a flat surface. Measure the inseam from the crotch, where the front and back seams meet, to the bottom of the leg.
Pants Length
Button up the pants. Lay the pants flat on a flat surface with the outseams along both edges. Be sure to smooth out any wrinkles and excess fabric from the back panel. Measure the distance from the top of the waistband to the bottom of the hem.
Total Length
Lay the skirt that best matches your size flat with the side seams facing upward. Use your hand to smooth out any wrinkles in the fabric. Then measure the distance between the top edge and the bottom edge. For the most accurate result, measure along the side seam.
Waist circumference
Lay the skirt that best matches your size flat with the zipper facing upward. Use your hand to smooth out any wrinkles in the fabric. Measure the top part of the skirt (the waistline) from one side edge to the opposite side edge. Then double the result to get the waist circumference.
Hip circumference
Lay the skirt that best matches your size flat with the zipper facing upward. Use your hand to smooth out any wrinkles in the fabric. Then measure the distance between the opposite sides at the hip area (depending on the skirt’s cut, the hips should be approximately 11–14 cm below the top edge of the skirt). Double the result to get the hip circumference.
SIZE GUIDE - TOPS
(TOLERANCE FOR THE MEASUREMENTS IN THE TABLE IS +/- 2 CM)
| TOPS SIZE (CM) | XS | S | M | L | XL | XXL | XXXL | XXXXL | |
|---|---|---|---|---|---|---|---|---|---|
| 1/2 Chest | 54 | 57 | 60 | 63 | 66 | 69 | 72 | 75 | |
| 1/2 Waist | 50 | 53 | 56 | 59 | 62 | 65 | 68 | 71 | |
| Front | 67 | 69.5 | 72 | 74.5 | 77 | 79.5 | 82 | 84.5 | |
| Sleeve | 77 | 78.5 | 80 | 81.5 | 83 | 84.5 | 86 | 87.5 | |
SIZE GUIDE - PANTS
(MEASUREMENTS IN THE TABLE HAVE A TOLERANCE OF +/- 2 CM)
| MEASUREMENTS (CM) | S | M | L | XL | XXL | XXXL |
|---|---|---|---|---|---|---|
| 1/2 Waist Width | 41 | 44 | 47 | 50 | 53 | 56 |
| 1/2 Hip Width | 52 | 55 | 58 | 61 | 64 | 67 |
| Length incl.Waist normal/long | 107 / 112 | 107.5 / 112.5 | 108 / 113 | 108.5 / 113.5 | 109 / 114 | 109.5 / 114.5 |
| Inside leg length normal/long | 81 / 86 | 81 / 86 | 81 / 86 | 81 / 86 | 81 / 86 | 81 / 86 |
| 1/2 Leg opening | 21 | 21.5 | 22 | 22.5 | 23 | 23.5 |
The customer purchases the goods at their own risk and is responsible for complying with all local legal requirements regarding the purchase, possession, use, or transport of the goods available in the online store.
This includes, but is not limited to, ASG (airsoft guns), airguns, and paintball replicas, which may be subject to specific regulations concerning weapons and ammunition. Restrictions on the purchase, possession, use, or transport of these goods may apply in the destination country, and the seller assumes no liability for this.
Any fees or costs incurred (including administrative, validation, tax, and customs) are the responsibility of the customer. The use of ASG (airsoft guns), airguns, and paintball replicas requires proper safety measures and caution.
These items are not intended for individuals under 18 years of age.
-
14-day right of withdrawal and return policy.
-
We deliver to all EU countries within 1–5 days!
-
Customs and duties included
